VKVVKVSKIMMER
Support

FEATURES

Everything a skimmer should do.
Nothing it shouldn't.

Direct I/Q from the Icom IC-7610 and IC-7760 — the only skimmer that does it

VKVSkimmer reads the I/Q stream straight from the radio's USB 3 I/Q port, in 64-bit. No 32-bit chain of Icom ExtIO driver, HDSDR and virtual audio cables: nothing to configure in between, no extra latency, no audio routing that breaks after a Windows update. The same connection gives CI-V tuning, RUN mode on the SUB receiver and protection against spotting while you transmit.

Neural CW decoding

DeepCW-family networks are the primary decoder, with a Viterbi decoder as a second opinion. A longer reading never wins by itself: a correction needs repetition, agreement between decoders and confidence on the differing characters.

RBN Reference

Spots from the Reverse Beacon Network are kept in a short RAM buffer and used to confirm, hold or reject each local candidate. If dozens of skimmers hear F5VKV, a truncated F5VK never reaches your cluster. RBN never creates or rewrites a callsign.

Strict callsign validation

cty.dat and Super Check Partial. A portable call needs a real prefix: XYZ/F5VKV is blocked, never “fixed”.

CQ / TEST / UP / QSO roles

Each station is tagged from what it actually sends. A caller answering a runner is not spotted as CQ.

RUN mode

Callers-only view around your run frequency. Clicking a caller tunes the Icom SUB receiver — your TX frequency never moves.

Web GUI

Spectrum, waterfall, spots, signals and a live decoder in your browser. Band ranges and your callsign are set from Settings, live.

N1MM+ spectrum

The skimmer's own spectrum goes to the N1MM Logger+ Spectrum Display over UDP, with the spots on top. No I/Q is shared: the radio stays with the skimmer.

Built-in telnet cluster

The skimmer is its own DX cluster. Connect with any telnet client, or from loggers that support a cluster such as N1MM Logger+ and DXLog. Output for the RBN Aggregator too.

Local TX protection

With direct Icom I/Q the TX state is read over CI-V: windows that overlap your own transmission never produce a spot.

Contest catalogue

A plain contests.txt lists contest names and CQ words for CW and RTTY. Update it by replacing the file — nothing is scraped.

TWO PROGRAMS, TWO DECODER CHAINS

Two executables. One experience.

VKVSkimmer is distributed as two independent programs, VKVSkimmer_CW and VKVSkimmer_RTTY. Each has its own decoder chain, settings and port, and you can run one or both. The web GUI, the telnet cluster and the integrations are the same, so once you know one you know the other.

  • DeepCW + Viterbi fusion — neural decoder first, Viterbi as complementary evidence.
  • CPU profiles — AUTO adapts decoding effort to the load; LIGHT for older PCs; MAXIMUM for powerful machines.
  • Benchmark modes — DEEPCW, DEEPCWN, NORMAL, STRONG, AGGRESSIVE, LUDICROUS under Advanced.
  • Live decoder — click any signal and read it in real time.
What's specific to CWLive CW decoder at the bottom of the GUI, CPU profiles and benchmark modes.

THE SHARED GUI

Everything on one screen.

VKVSkimmer web GUI — band and segment buttons, overview strip, spot labels on the spectrum, CQ/TEST/UP/QSO filters, spot list with country, dB and WPM, and the live decoder

FROM I/Q TO SPOT

Six checks before anything is published.

  1. I/Q inWideband I/Q from the Icom, an RTL-SDR dongle or an SDRplay RSP, split into band segments.
  2. DetectFFT spectrum finds every CW or RTTY signal.
  3. DecodeNeural + Viterbi for CW, multi-signal FSK for RTTY.
  4. ValidateStructure, cty.dat prefix, Super Check Partial, role.
  5. Cross-checkRBN Reference confirms, holds or rejects.
  6. SpotTelnet cluster, RBN Aggregator, web GUI, N1MM+.
GOLDEN RULEIf a callsign, a prefix or a CQ role is uncertain, it is not published. Same rule for CW and RTTY.

RADIOS & INPUTS

Plug in what you have.

Best with direct USB I/Q from the Icom IC-7610 / IC-7760, which also enables CI-V tuning, RUN mode on the SUB receiver and TX protection. RTL-SDR dongles, SDRplay RSP receivers and sound cards work too.

CW GUI127.0.0.1:8073
RTTY GUI127.0.0.1:8074
Icom IC-7610 / IC-7760Direct USB 3 I/Q + CI-V, 64-bit, no HDSDR / no virtual audio cables
RTL-SDR donglevia rtl_tcp (RTL-SDR Blog)
SDRplay RSPSDRplay API 3
Sound card I/QI/Q on a sound card input
Icom IF outputRadio USB audio codec
Receiver audioAny radio, sound card

CW and RTTY cannot share the same direct Icom I/Q device at the same time.

SUPPORT THE PROJECT

VKVSkimmer is free. Keep it on the air.

No licence, no subscription. If the skimmer is useful in your shack or in a contest, a coffee on Ko-fi helps cover development, test hardware and hosting.

Donate on Ko-fi